Port Forwarding the BT Voyager200 Router for Defender SN500-4CH-002

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View BT Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > BT > Voyager200 > Defender SN500-4CH-002

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the BT Voyager200 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the BT Voyager200 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your BT Voyager200 Router IP Address

It's ok if you don't know your BT Voyager200 router's internal IP address. You can find it by doing one of the following:

Login To The BT Voyager200 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

BT Voyager200 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your BT Voyager200 router. By default the IP address should be set to

BT Voyager200 Screenshot 1

Click the Advanced link near the left of the page.

BT Voyager200 Screenshot 2

You should see a box prompting you for your username and password. Enter your username and password now.

The Default BT Voyager200 Router Username is: admin

The Default BT Voyager200 Router Password is: admin

Click the Ok button to log in to your BT Voyager200 router.

Default Usernames and Passwords for other BT Routers

Please visit our Default BT Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your BT Voyager200 router username and password, use our How to Reset a Router Password guide to set your BT Voyager200 router back to its factory settings.

How to Port Forward Defender SN500-4CH-002 on the BT Voyager200

Having trouble forwarding ports on the BT Voyager200?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

BT Voyager200 Router Port Forwarding Screenshots

Now that you are logged in to your BT Voyager200 router you should see the following:

Click the Configuration link near the left of the page.

You should now see a new menu. In this new menu, click Virtual Server.

BT Voyager200 Screenshot 3

Click the Create a new virtual server button near the bottom of the page.

BT Voyager200 Screenshot 4

Forward Ports 80 on the BT Voyager200

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Defender SN500-4CH-002 requires you to forward the 80 ports. Go ahead and enter the settings shown above into the Virtual Server Configuration menu and then click Apply.

PVC name  
External Packet    
TCP/IP port Pre-defined:
  User-defined: (1-65534)

Internal host    
IP Address . . .
Port (1-65534)

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for Defender SN500-4CH-002 on the BT Voyager200 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

BT Voyager200 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our BT Router Screenshots. We have the Internets largest collection of Router Screenshots.