Port Forwarding the Baudtec T263R1U Router for Network Thermostat UP32-WIFI


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Baudtec T263R1U Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Baudtec > T263R1U > Network Thermostat UP32-WIFI

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Baudtec T263R1U router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the Baudtec T263R1U Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Baudtec T263R1U Router IP Address

It's ok if you don't know your Baudtec T263R1U router's internal IP address. You can find it by doing one of the following:

Login To The Baudtec T263R1U Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Baudtec T263R1U Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Baudtec T263R1U router. By default the IP address should be set to 192.168.1.1.

Baudtec T263R1U Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Baudtec T263R1U Router Username is: admin

The Default Baudtec T263R1U Router Password is: 1234


Click the Ok button to log in to your Baudtec T263R1U router.


Default Usernames and Passwords for other Baudtec Routers

Please visit our Default Baudtec Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Baudtec T263R1U router username and password, use our How to Reset a Router Password guide to set your Baudtec T263R1U router back to its factory settings.


How to Port Forward Network Thermostat UP32-WIFI on the Baudtec T263R1U


Having trouble forwarding ports on the Baudtec T263R1U?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Baudtec T263R1U router to save you time and hassle.

Before we can forward ports, we need to do a little configuration. Here is a brief walkthrough on how to do that. Go ahead and open up your thermostat's Configuration page.



On this page you need to change the HTTP Port to 81, and ASCII Port to 10001. For every additional thermostat you'll want to increase each number by one. So thermostat #1 would be ports 81 and 10001, thermostat #2 would be ports 82 and 10002, thermostat #3 would be ports 83 and 10003, ect.

Once you've finished configuring things, go ahead and click the Save & Reboot button to save things. After you have finished saving and rebooting, you will need to log in to your thermostat again.

Baudtec T263R1U Router Port Forwarding Screenshots

Now that you are logged in to your Baudtec T263R1U router you should see the following:

Baudtec T263R1U Screenshot 2

Click the Advanced Setup button near the top of the page.

Baudtec T263R1U Screenshot 3

Click the NAT link near the top of the page.

Baudtec T263R1U Screenshot 4

Click the Virtual Server link near the bottom of the page.

Baudtec T263R1U Screenshot 5

Forward Ports 81 on the Baudtec T263R1U

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Network Thermostat UP32-WIFI requires you to forward the 81,10001 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Save.

Rule Index :
Application :
Start Port Number :
End Port Number :
Local IP Address :


Forward Ports 10001 on the Baudtec T263R1U

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings and then click Save.

Rule Index :
Application :
Start Port Number :
End Port Number :
Local IP Address :

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for Network Thermostat UP32-WIFI on the Baudtec T263R1U you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Baudtec T263R1U Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Baudtec T263R1U Router Screenshots. We have the Internets largest collection of Router Screenshots.