If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.
To setup port forwarding on the BeWAN 700-ADSL2+ router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your BeWAN 700-ADSL2+ router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your BeWAN 700-ADSL2+ router. By default the IP address should be set to 192.168.1.1.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your BeWAN 700-ADSL2+ router to save you time and hassle.
Before we can forward ports for SababaDC, we need to figure out what ports SababaDC is using. Here is a brief walkthrough on how to do that. Go ahead and open up SababaDC.
Click the File button in the menu at the top of your screen. In the menu that drops down click Settings.
In the menu on the left hand side of this page click the Connection Settings link. You should see a TCP Port box and an UDP Port box. Enter a random port into each of these boxes. It doesn't matter what ports you choose, but a port numbers between 10000 and 60000 would be a good idea. A higher numbered port is generally the best to use, because most ISP's do not block the higher numbered ports. Please enter the port you chose for the TCP Port box into the box below.
Please enter the port you chose for the UDP Port box into the box below.
Now that you are logged in to your BeWAN 700-ADSL2+ router you should see the following:
Click the Reglages Avances link near the top of the page.
You should now see a new menu. In this new menu, click Redirection des ports.
Put a dot into the User radio button.
Click the Creer button.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. SababaDC requires you to forward the AppFullPortsListTag ports. Go ahead and enter the settings shown above into the Nouvelle regle menu and then click Terminer.
You should see another page of settings that need to be entered into one of the blank lines on your routers Nouvelle regle page. Go ahead and enter those settings and then click Terminer.
Select the applications you just created in the Regles disponibles list, then click the Ajouter > button to move them to the Regles appliquees box.
When you are finished, click the Terminer button.
Now that you have forwarded ports for SababaDC on the BeWAN 700-ADSL2+ you should test to see if your ports are forwarded correctly.