Forwarding Ports on the Belgacom B-Box2 Router

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Belgacom > B-Box2 > Port Forwarding Guide

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Belgacom B-Box2 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.1. <-- Don't Skip This Step!

Login to the Belgacom B-Box2 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Belgacom B-Box2 Router IP Address

It's ok if you don't know your Belgacom B-Box2 router's internal IP address. You can find it by doing one of the following:

Login To The Belgacom B-Box2 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Belgacom B-Box2 Screenshot 0

In the picture above the address bar has in it. Just replace all of that with the internal IP address of your Belgacom B-Box2 router. By default the IP address should be set to

Belgacom B-Box2 Screenshot 1

We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!

Please visit our Default Router Passwords page if the username and password shown above do not work for you.

How to Port Forward any port on the Belgacom B-Box2

Having trouble forwarding ports on the Belgacom B-Box2?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Belgacom B-Box2 Router Port Forwarding Screenshots

Now that you are logged in to your Belgacom B-Box2 router you should see the following:

Belgacom B-Box2 Screenshot 2

Click the NAT link near the left of the page.

You should now see a new menu. In this new menu, click Virtual Server.

Belgacom B-Box2 Screenshot 3

Enter the ip address to forward these ports to into the LAN IP Address box. If you are forwarding ports so you can run a program on your device, you should enter your device's ip address into that box.

Use the Protocol Type drop down box to select the protocol type of the ports you are forwarding.

Enter the port to forward into the LAN Port and Public Port box.

Put a checkmark in the Enable checkbox.

When you are finished, click the Add button.

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for any port on the Belgacom B-Box2 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Belgacom B-Box2 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.