Port Forwarding the Belkin F1PI241ENau Router for Wizard 101

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Belkin Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Belkin > F1PI241ENau > Wizard 101

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Belkin F1PI241ENau router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

10.1.1. <-- Don't Skip This Step!

Login to the Belkin F1PI241ENau Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Belkin F1PI241ENau Router IP Address

It's ok if you don't know your Belkin F1PI241ENau router's internal IP address. You can find it by doing one of the following:

Login To The Belkin F1PI241ENau Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Belkin F1PI241ENau Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Belkin F1PI241ENau router. By default the IP address should be set to

Belkin F1PI241ENau Screenshot 1

You should see a box prompting you for your Belkin F1PI241ENau password. Enter the password now.

The Default Belkin F1PI241ENau Router Password is: admin

Click the Login button to log in to your Belkin F1PI241ENau router.

Default Usernames and Passwords for other Belkin Routers

Please visit our Default Belkin Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Belkin F1PI241ENau router password, use our How to Reset a Router Password guide to set your Belkin F1PI241ENau router back to its factory settings.

How to Port Forward Wizard 101 on the Belkin F1PI241ENau

Having trouble forwarding ports on the Belkin F1PI241ENau?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Belkin F1PI241ENau Router Port Forwarding Screenshots

Now that you are logged in to your Belkin F1PI241ENau router you should see the following:

Belkin F1PI241ENau Screenshot 2

Click the NAT link near the left of the page.

You should now see a new menu. In this new menu, click Port Forwarding.

Belkin F1PI241ENau Screenshot 3

Forward Ports 12000-12999 on the Belkin F1PI241ENau

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Wizard 101 requires you to forward the 12000-12999 ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Add.

No. Lan IP Address Protocol Type Lan
1 192.168.2.

Forward Ports 12000-12999 on the Belkin F1PI241ENau

You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding page. Go ahead and enter those settings and then click Add.

No. Lan IP Address Protocol Type Lan
2 192.168.2.

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for Wizard 101 on the Belkin F1PI241ENau you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Belkin F1PI241ENau Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Belkin Router Screenshots. We have the Internets largest collection of Router Screenshots.