Port Forwarding the Belkin F1PI242EGau Router for FileZilla Server

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Belkin Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Belkin > F1PI242EGau > FileZilla Server

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Belkin F1PI242EGau router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

10.1.1. <-- Don't Skip This Step!

Login to the Belkin F1PI242EGau Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Belkin F1PI242EGau Router IP Address

It's ok if you don't know your Belkin F1PI242EGau router's internal IP address. You can find it by doing one of the following:

Login To The Belkin F1PI242EGau Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Belkin F1PI242EGau Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Belkin F1PI242EGau router. By default the IP address should be set to

Belkin F1PI242EGau Screenshot 1

You should see a box prompting you for your Belkin F1PI242EGau password. Enter the password now.

The Default Belkin F1PI242EGau Router Password is: admin

Click the Login button to log in to your Belkin F1PI242EGau router.

Default Usernames and Passwords for other Belkin Routers

Please visit our Default Belkin Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Belkin F1PI242EGau router password, use our How to Reset a Router Password guide to set your Belkin F1PI242EGau router back to its factory settings.

How to Port Forward FileZilla Server on the Belkin F1PI242EGau

Having trouble forwarding ports on the Belkin F1PI242EGau?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Belkin F1PI242EGau Router Port Forwarding Screenshots

Now that you are logged in to your Belkin F1PI242EGau router you should see the following:

Belkin F1PI242EGau Screenshot 2

Click the Advanced Setup button near the left of the page.

Belkin F1PI242EGau Screenshot 3

Click the NAT link near the left of the page.

You should now see a new menu. In this new menu, click Port Forwarding.

Belkin F1PI242EGau Screenshot 4

Forward Ports 14147 on the Belkin F1PI242EGau

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. FileZilla Server requires you to forward the following ports: 14147. Go ahead and enter the settings shown above into the Port Forwarding menu.

  Enable Description Inbound Port Type Private IP Address Private Port
1 10.1.1.

When you're finished, click Save Settings near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for FileZilla Server on the Belkin F1PI242EGau you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Belkin F1PI242EGau Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Belkin Router Screenshots. We have the Internets largest collection of Router Screenshots.