Port Forwarding the Belkin F5D7231-4P Router for Qsee QSD2304C4-250

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Belkin Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Belkin > F5D7231-4P > Qsee QSD2304C4-250

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Belkin F5D7231-4P router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.2. <-- Don't Skip This Step!

Login to the Belkin F5D7231-4P Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Belkin F5D7231-4P Router IP Address

It's ok if you don't know your Belkin F5D7231-4P router's internal IP address. You can find it by doing one of the following:

Login To The Belkin F5D7231-4P Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Belkin F5D7231-4P Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Belkin F5D7231-4P router. By default the IP address should be set to

Belkin F5D7231-4P Screenshot 1

You should see a box prompting you for your Belkin F5D7231-4P password. Enter the password now.

The Default Belkin F5D7231-4P Router Password is: blank

Click the Submit button to log in to your Belkin F5D7231-4P router.

Default Usernames and Passwords for other Belkin Routers

Please visit our Default Belkin Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Belkin F5D7231-4P router password, use our How to Reset a Router Password guide to set your Belkin F5D7231-4P router back to its factory settings.

How to Port Forward Qsee QSD2304C4-250 on the Belkin F5D7231-4P

Having trouble forwarding ports on the Belkin F5D7231-4P?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select System

  • Select Network

  • Put a check in the DHCP box.
  • Select OK.

  • Exit out to the live cameras by pressing the ESC button on the DVR.

Power Cycle the DVR

  • Remove the power cable from the back of the dvr.
  • Wait 20 seconds.
  • Plug in the power cable.

Identifying the IP address

  • Press Menu
  • Select Info
  • Select Network

  • Write down the IP address, subnet mask & gateway found on your info network screen.

Assign a Static IP

  • Press Menu
  • Select System

  • Select Network

  • Remove the check from the DHCP box.
  • Input the same IP address, subnet mask & gateway - (you wrote down earlier).

  • Select ok

Belkin F5D7231-4P Router Port Forwarding Screenshots

Now that you are logged in to your Belkin F5D7231-4P router you should see the following:

Belkin F5D7231-4P Screenshot 2

Click the Virtual servers link near the left of the page.

Belkin F5D7231-4P Screenshot 3

Forward Ports 80 on the Belkin F5D7231-4P

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Qsee QSD2304C4-250 requires you to forward the following ports: 80,2000. Go ahead and enter the settings shown above into the Virtual servers menu.

  Enabled Description Inbound Port Type Private IP Private Port
1.  -  TCP
192.168.2.  - 

Forward Ports 2000 on the Belkin F5D7231-4P

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual servers page. Go ahead and enter those settings now.

  Enabled Description Inbound Port Type Private IP Private Port
2.  -  TCP
192.168.2.  - 

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for Qsee QSD2304C4-250 on the Belkin F5D7231-4P you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Belkin F5D7231-4P Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Belkin Router Screenshots. We have the Internets largest collection of Router Screenshots.