Port Forwarding the Belkin F5D7633-4 Router for QSee QSDR8V8DRTC-320

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Belkin F5D7633-4 Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Belkin > F5D7633-4 > QSee QSDR8V8DRTC-320

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Belkin F5D7633-4 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Belkin F5D7633-4 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Belkin F5D7633-4 Router IP Address

It's ok if you don't know your Belkin F5D7633-4 router's internal IP address. You can find it by doing one of the following:

Login To The Belkin F5D7633-4 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Belkin F5D7633-4 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Belkin F5D7633-4 router. By default the IP address should be set to

Belkin F5D7633-4 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Belkin F5D7633-4 Router Username is: blank

The Default Belkin F5D7633-4 Router Password is: blank

Click the Ok button to log in to your Belkin F5D7633-4 router.

Default Usernames and Passwords for other Belkin Routers

Please visit our Default Belkin Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Belkin F5D7633-4 router username and password, use our How to Reset a Router Password guide to set your Belkin F5D7633-4 router back to its factory settings.

How to Port Forward QSee QSDR8V8DRTC-320 on the Belkin F5D7633-4

Having trouble forwarding ports on the Belkin F5D7633-4?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select Network
  • Make sure Type is set to DHCP

  • Select Apply
  • Select Exit
The DVR will reboot & pick up an ip address from the router.

Identifying the IP address

  • Press Menu
  • Select Network
  • Write down the ip address, subnet mask & gateway.

Assign a Static IP

  • Change Type to Static
  • Input the same ip address, subnet mask & gateway - (you wrote down earlier).

  • Select Apply
  • Select Exit
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.

Belkin F5D7633-4 Router Port Forwarding Screenshots

Now that you are logged in to your Belkin F5D7633-4 router you should see the following:

Belkin F5D7633-4 Screenshot 2

Click the Virtual Server link near the left of the page.

Click the Add button.

Belkin F5D7633-4 Screenshot 3

Forward Ports 80 on the Belkin F5D7633-4

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSDR8V8DRTC-320 requires you to forward the following ports: 80,9000. Go ahead and enter the settings shown above into the Virtual Servers menu.

Server Name:  
  Select a Service:
  Custom Service:
Server IP Address:

External Port Start External Port End Protocol Internal Port Start Internal Port End

Forward Ports 9000 on the Belkin F5D7633-4

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Servers page. Go ahead and enter those settings now.

Server Name:  
  Select a Service:
  Custom Service:
Server IP Address:

External Port Start External Port End Protocol Internal Port Start Internal Port End

When you're finished, click Add near the top of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for QSee QSDR8V8DRTC-320 on the Belkin F5D7633-4 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Belkin F5D7633-4 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Belkin F5D7633-4 Router Screenshots. We have the Internets largest collection of Router Screenshots.