Port Forwarding the Belkin F9K1102v1 Router for Access Remote PC

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Belkin F9K1102v1 Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Belkin > F9K1102v1 > Access Remote PC

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Belkin F9K1102v1 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.2. <-- Don't Skip This Step!

Login to the Belkin F9K1102v1 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Belkin F9K1102v1 Router IP Address

It's ok if you don't know your Belkin F9K1102v1 router's internal IP address. You can find it by doing one of the following:

Login To The Belkin F9K1102v1 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Belkin F9K1102v1 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Belkin F9K1102v1 router. By default the IP address should be set to

Belkin F9K1102v1 Screenshot 2

Click the Virtual Servers link near the left of the page.

Belkin F9K1102v1 Screenshot 1

You should see a box prompting you for your Belkin F9K1102v1 password. Enter the password now.

The Default Belkin F9K1102v1 Router Password is: blank

Click the Submit button to log in to your Belkin F9K1102v1 router.

Default Usernames and Passwords for other Belkin Routers

Please visit our Default Belkin Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Belkin F9K1102v1 router password, use our How to Reset a Router Password guide to set your Belkin F9K1102v1 router back to its factory settings.

How to Port Forward Access Remote PC on the Belkin F9K1102v1

Having trouble forwarding ports on the Belkin F9K1102v1?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Belkin F9K1102v1 Router Port Forwarding Screenshots

Now that you are logged in to your Belkin F9K1102v1 router you should see the following:

Belkin F9K1102v1 Screenshot 3

Forward Ports 34012 on the Belkin F9K1102v1

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Access Remote PC requires you to forward the following ports: 34012. Go ahead and enter the settings shown above into the Virtual Servers menu.

  Enable Description Inbound Port Type Private IP Address Private Port
1 192.168.2.

When you're finished, click Apply Changes near the top of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for Access Remote PC on the Belkin F9K1102v1 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Belkin F9K1102v1 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Belkin F9K1102v1 Router Screenshots. We have the Internets largest collection of Router Screenshots.