Port Forwarding the Belkin WRTR-159G Router for eMule


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Belkin Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Belkin > WRTR-159G > eMule

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Belkin WRTR-159G router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

192.168.2. <-- Don't Skip This Step!

Login to the Belkin WRTR-159G Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Belkin WRTR-159G Router IP Address

It's ok if you don't know your Belkin WRTR-159G router's internal IP address. You can find it by doing one of the following:

Login To The Belkin WRTR-159G Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Belkin WRTR-159G Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Belkin WRTR-159G router. By default the IP address should be set to 192.168.2.1.

Belkin WRTR-159G Screenshot 1

You should see a box prompting you for your Belkin WRTR-159G password. Enter the password now.

The Default Belkin WRTR-159G Router Password is: blank


Click the Submit button to log in to your Belkin WRTR-159G router.


Default Usernames and Passwords for other Belkin Routers

Please visit our Default Belkin Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Belkin WRTR-159G router password, use our How to Reset a Router Password guide to set your Belkin WRTR-159G router back to its factory settings.


How to Port Forward eMule on the Belkin WRTR-159G


Having trouble forwarding ports on the Belkin WRTR-159G?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Belkin WRTR-159G router to save you time and hassle.

Before we can forward ports for eMule, we need to figure out what ports eMule is using. Here is a brief walkthrough on how to do that. Go ahead and open up eMule.

Click the Options button in the menu at the top of your screen.

Click the Connection option on the left hand side of your screen. You should see a TCP box and an UDP box. Enter a random port into each of these boxes. It doesn't matter what ports you choose, but a port numbers between 10000 and 60000 would be a good idea. A higher numbered port is generally the best to use, because most ISP's do not block the higher numbered ports. Please enter the port you chose for the TCP box into the box below.

eMule's port for incoming TCP connections

Please enter the port you chose for the UDP box into the box below.

eMule's port for incoming UDP connections

Belkin WRTR-159G Router Port Forwarding Screenshots

Now that you are logged in to your Belkin WRTR-159G router you should see the following:

Belkin WRTR-159G Screenshot 2

Click the Virtual Servers link near the left of the page.

Belkin WRTR-159G Screenshot 3

Forward User Defined Port on the Belkin WRTR-159G

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. eMule requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Virtual Servers menu.

  Enable Description Inbound Port Type Private IP Address Private Port
1. - 192.168.2. -


Forward User Defined Port on the Belkin WRTR-159G

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Servers page. Go ahead and enter those settings now.

  Enable Description Inbound Port Type Private IP Address Private Port
2. - 192.168.2. -

When you're finished, click Apply Changes near the top of the screen to save your changes.

And that's it! You're done!


Test if Your Ports are Open

Now that you have forwarded ports for eMule on the Belkin WRTR-159G you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Belkin WRTR-159G Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Belkin Router Screenshots. We have the Internets largest collection of Router Screenshots.