Port Forwarding the Benq AWL700 Router for Transmission

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Benq > AWL700 > Transmission

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Benq AWL700 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Benq AWL700 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Benq AWL700 Router IP Address

It's ok if you don't know your Benq AWL700 router's internal IP address. You can find it by doing one of the following:

Login To The Benq AWL700 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Benq AWL700 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Benq AWL700 router. By default the IP address should be set to

Benq AWL700 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Benq AWL700 Router Username is: admin

The Default Benq AWL700 Router Password is: admin

Click the Ok button to log in to your Benq AWL700 router.

Default Usernames and Passwords for other Benq Routers

Please visit our Default Benq Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Benq AWL700 router username and password, use our How to Reset a Router Password guide to set your Benq AWL700 router back to its factory settings.

How to Port Forward Transmission on the Benq AWL700

Having trouble forwarding ports on the Benq AWL700?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Benq AWL700 Router Port Forwarding Screenshots

Now that you are logged in to your Benq AWL700 router you should see the following:

Benq AWL700 Screenshot 2

Click the NAT/DMZ Setup link near the left of the page.

Benq AWL700 Screenshot 3

Forward Ports 51413 on the Benq AWL700

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Transmission requires you to forward the 51413 ports. Go ahead and enter the settings shown above into the NAT/DMZ Setup menu and then click Change.

Protocol Service
Port Number
Server IP
Server Port

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for Transmission on the Benq AWL700 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Benq AWL700 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.