Port Forwarding the Billion Bipac-5200 Router for Qsee QSD2316C8-500


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Billion Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Billion > Bipac-5200 > Qsee QSD2316C8-500
24/Mar/2007 1:00

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Billion Bipac-5200 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the Billion Bipac-5200 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Billion Bipac-5200 Router IP Address

It's ok if you don't know your Billion Bipac-5200 router's internal IP address. You can find it by doing one of the following:

Login To The Billion Bipac-5200 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Billion Bipac-5200 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Billion Bipac-5200 router. By default the IP address should be set to 192.168.1.254.

Billion Bipac-5200 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Billion Bipac-5200 Router Username is: admin

The Default Billion Bipac-5200 Router Password is: admin


Click the Ok button to log in to your Billion Bipac-5200 router.


Default Usernames and Passwords for other Billion Routers

Please visit our Default Billion Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Billion Bipac-5200 router username and password, use our How to Reset a Router Password guide to set your Billion Bipac-5200 router back to its factory settings.


How to Port Forward Qsee QSD2316C8-500 on the Billion Bipac-5200


Having trouble forwarding ports on the Billion Bipac-5200?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Billion Bipac-5200 router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select System

  • Select Network

  • Put a check in the DHCP box.
  • Select OK.

  • Exit out to the live cameras by pressing the ESC button on the DVR.


Power Cycle the DVR

  • Remove the power cable from the back of the dvr.
  • Wait 20 seconds.
  • Plug in the power cable.


Identifying the IP address

  • Press Menu
  • Select Info
  • Select Network

  • Write down the IP address, subnet mask & gateway found on your info network screen.



Assign a Static IP

  • Press Menu
  • Select System

  • Select Network

  • Remove the check from the DHCP box.
  • Input the same IP address, subnet mask & gateway - (you wrote down earlier).

  • Select ok

Billion Bipac-5200 Router Port Forwarding Screenshots

Now that you are logged in to your Billion Bipac-5200 router you should see the following:

Billion Bipac-5200 Screenshot 2

Click the Advanced Setup link near the top of the page.

Click the NAT link near the top of the page.

Billion Bipac-5200 Screenshot 3

Click the Virtual Server link near the center of the page.

Billion Bipac-5200 Screenshot 4

Forward Ports 80 on the Billion Bipac-5200

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Qsee QSD2316C8-500 requires you to forward the 80,2000 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Save.

Rule Index :
Start Port Number :
End Port Number :
Local IP Address :


Forward Ports 2000 on the Billion Bipac-5200

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings and then click Save.

Rule Index :
Start Port Number :
End Port Number :
Local IP Address :

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for Qsee QSD2316C8-500 on the Billion Bipac-5200 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Billion Bipac-5200 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Billion Router Screenshots. We have the Internets largest collection of Router Screenshots.