Port Forwarding the Buffalo WZR-HP-G300NH Router for Elite Force

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Buffalo Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Buffalo > WZR-HP-G300NH > Elite Force

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Buffalo WZR-HP-G300NH router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Buffalo WZR-HP-G300NH Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Buffalo WZR-HP-G300NH Router IP Address

It's ok if you don't know your Buffalo WZR-HP-G300NH router's internal IP address. You can find it by doing one of the following:

Login To The Buffalo WZR-HP-G300NH Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Buffalo WZR-HP-G300NH Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Buffalo WZR-HP-G300NH router. By default the IP address should be set to

Buffalo WZR-HP-G300NH Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Buffalo WZR-HP-G300NH Router Username is: root

The Default Buffalo WZR-HP-G300NH Router Password is: blank

Click the Ok button to log in to your Buffalo WZR-HP-G300NH router.

Default Usernames and Passwords for other Buffalo Routers

Please visit our Default Buffalo Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Buffalo WZR-HP-G300NH router username and password, use our How to Reset a Router Password guide to set your Buffalo WZR-HP-G300NH router back to its factory settings.

How to Port Forward Elite Force on the Buffalo WZR-HP-G300NH

Having trouble forwarding ports on the Buffalo WZR-HP-G300NH?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Buffalo WZR-HP-G300NH router to save you time and hassle.

Buffalo WZR-HP-G300NH Router Port Forwarding Screenshots

Now that you are logged in to your Buffalo WZR-HP-G300NH router you should see the following:

Buffalo WZR-HP-G300NH Screenshot 2

Click the LAN Config button near the top of the page.

Buffalo WZR-HP-G300NH Screenshot 3

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Elite Force requires you to forward the AppFullPortsListTag ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Add.

You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding page. Go ahead and enter those settings and then click Add.

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for Elite Force on the Buffalo WZR-HP-G300NH you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Buffalo WZR-HP-G300NH Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Buffalo Router Screenshots. We have the Internets largest collection of Router Screenshots.