Port Forwarding the Buffalo WZR2-G300N Router for QSee QSD42908


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Buffalo WZR2-G300N Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Buffalo > WZR2-G300N > QSee QSD42908

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Buffalo WZR2-G300N router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the Buffalo WZR2-G300N Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Buffalo WZR2-G300N Router IP Address

It's ok if you don't know your Buffalo WZR2-G300N router's internal IP address. You can find it by doing one of the following:

Login To The Buffalo WZR2-G300N Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Buffalo WZR2-G300N Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Buffalo WZR2-G300N router. By default the IP address should be set to 192.168.11.1.

Buffalo WZR2-G300N Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Buffalo WZR2-G300N Router Username is: root

The Default Buffalo WZR2-G300N Router Password is: blank


Click the Ok button to log in to your Buffalo WZR2-G300N router.


Default Usernames and Passwords for other Buffalo Routers

Please visit our Default Buffalo Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Buffalo WZR2-G300N router username and password, use our How to Reset a Router Password guide to set your Buffalo WZR2-G300N router back to its factory settings.


How to Port Forward QSee QSD42908 on the Buffalo WZR2-G300N


Having trouble forwarding ports on the Buffalo WZR2-G300N?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Buffalo WZR2-G300N router to save you time and hassle.

Before we can forward ports to your DVR, we need to change some settings in your DVR. Press Menu on your remote control to get in to your DVR's main menu.

In main menu, move the Active Frame to the Network icon and press ENTER.

Write down the number that is in the IP, Gateway, and Mask settings. Do not change the Gateway and Mask settings. We are going to create static ip address for your DVR and use it from now on. The IP address in the picture above is 192.0.0.64. The 64 portion of that ip address is called the last octet. Each octet of an ip address ranges from 1 to 254. If you have an ip address where the last octet is closer to 1 than 254, add 50 to the last octet and set the IP ADDR to that. If you have an ip address that is closer to 254 than 1, subtract 50 from that last octet and set the IP ADDR to that. Save the settings and get out of your DVR's setup. In this example the last octet was 64. So the new octet in this example would be 114, and the ip address in this example would be 192.0.0.114. Do not use those values they are just an example.

You will need to restart your DVR before those settings will take effect.

Remember what you set the IP ADDR to. You will need to tell your router what IP Address to forward those ports to. Since you want to forward ports to your DVR you will need your DVR's IP address.

We've already taken care of setting up the static ip address in the guide below so you don't need to worry about that part. Just enter your DVR's static ip address that we just setup in to the box requesting your computer's ip address bellow. You won't really be forwarding ports to your computer, but you will be forwarding them to your DVR. Everything else is the same, just keep in mind that the ports will end up being forwarded to your DVR and not your computer.

Buffalo WZR2-G300N Router Port Forwarding Screenshots

Now that you are logged in to your Buffalo WZR2-G300N router you should see the following:

Buffalo WZR2-G300N Screenshot 2

Click the Gaming Ports button near the top of the page.

You should now see a new menu. In this new menu, click Port Forwarding.

Buffalo WZR2-G300N Screenshot 3

Forward Ports 80 on the Buffalo WZR2-G300N

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSD42908 requires you to forward the 80,8000 ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Add.

Service   Service Name:
Service Type
Start Port
End Port
Server IP Address


Forward Ports 8000 on the Buffalo WZR2-G300N

You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding page. Go ahead and enter those settings and then click Add.

Service   Service Name:
Service Type
Start Port
End Port
Server IP Address

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for QSee QSD42908 on the Buffalo WZR2-G300N you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Buffalo WZR2-G300N Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Buffalo WZR2-G300N Router Screenshots. We have the Internets largest collection of Router Screenshots.