If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.
To setup port forwarding on the Ceberus-Adsl PC-0404000457 router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Ceberus-Adsl PC-0404000457 router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Ceberus-Adsl PC-0404000457 router. By default the IP address should be set to 192.168.1.254.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the OK button to log in to your Ceberus-Adsl PC-0404000457 router.
Please visit our Default Ceberus-Adsl Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Ceberus-Adsl PC-0404000457 router username and password, use our How to Reset a Router Password guide to set your Ceberus-Adsl PC-0404000457 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Ceberus-Adsl PC-0404000457 router to save you time and hassle.
Now that you are logged in to your Ceberus-Adsl PC-0404000457 router you should see the following:
Click the Configuration button near the left of the page.
Click the Virtual Server button near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. IL-2 requires you to forward the 21000 ports. Go ahead and enter the settings shown above into the Virtual Server Configuration menu and then click Add This Setting.
|ID||Public Port (From)||Public Port (To)||Port Type||Map To||Host IP Address||Private Port|
When you're finished, click Save Config near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for IL-2 on the Ceberus-Adsl PC-0404000457 you should test to see if your ports are forwarded correctly.