If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.
To setup port forwarding on the Cisco DPC2325 router your computer needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Cisco DPC2325 router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Cisco DPC2325 router. By default the IP address should be set to 192.168.0.1.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Cisco DPC2325 router to save you time and hassle.
Now that you are logged in to your Cisco DPC2325 router you should see the following:
Click the Port Forwarding link near the left of the page.
Enter the ip address to forward these ports to into the Local IP Adr box. If you are forwarding ports so you can run a program on your computer, you should enter your computer's ip address into that box.
If you are forwarding a single port, enter that port number into the Start Port and the End Port boxes. If you are forwarding a range of ports, enter the lowest number of that range into the Start Port box. Then enter the highest number of that range into the End Port box.
Use the Protocol drop down box to select the protocol type of the ports you are forwarding.
Put a checkmark in the Enable checkbox.
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for any port on the Cisco DPC2325 you should test to see if your ports are forwarded correctly.