If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.
To setup port forwarding on the Comtrend CT-562+ router your computer needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Comtrend CT-562+ router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Comtrend CT-562+ router. By default the IP address should be set to 192.168.0.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Comtrend CT-562+ router.
Please visit our Default Comtrend Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Comtrend CT-562+ router username and password, use our How to Reset a Router Password guide to set your Comtrend CT-562+ router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Comtrend CT-562+ router to save you time and hassle.
Now that you are logged in to your Comtrend CT-562+ router you should see the following:
Click the Firewall link near the left of the page.
Click the Policy Based NAT link near the top of the page.
Click the Add button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Need for Speed - Porsche requires you to forward the 9442 ports. Go ahead and enter the settings shown above into the NAT Action Configuration menu and then click Apply.
| Port Range Configuration | |
| Redirect Address | Redirect Port |
| Redirect Address From: | |
| Redirect Address To: | |
| Redirect Port From: | |
| Redirect Port To: | |
And that is it! You are done!
Now that you have forwarded ports for Need for Speed - Porsche on the Comtrend CT-562+ you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
Didn't find the screenshot you were looking for? Check our our Comtrend Router Screenshots. We have the Internets largest collection of Router Screenshots.