Free Port Forwarding Guides & PFConfig: Forward Your Ports Automatically
Port Forwarding BearShare on the Conceptronic C54APRA
Before we can forward ports for BearShare, we need to figure out what ports BearShare is using. Here is a brief walkthrough on how to do that. Go ahead and open up BearShare.
Click Setup in the menu at the top of your screen. In the list that drops down click Connection.
On this page you should see a Listening Port for Incomming TCP and UDP Connections box. This box contains the port you need to forward to the computer you are running BearShare on. You can change this port number if you want to. Please enter the port you chose into the box below.
BearShare's Port for incoming connections
To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for your computer.
Or you can take a look at our Static IP Address guide to setup a static ip address.
When you are finished setting up a static ip address, please come back to this page and enter
the ip address you setup in the Static IP Address box below.
Do not skip this step!
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router.
By default the IP address should be set to 10.1.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
By default both the username and password are admin. Click the Ok button to log in to your router.
Please visit our Default Router Passwords page if the username and password shown above do not work for you.
Click the Advanced link near the top of the page.
The menu on the left should change. In this new menu, click Port Forwarding.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. BearShare requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Virtual Server menu and then click Apply.
| Rule Name | |||
| Private IP | |||
| Protocol | |||
| Port Start | Port End | ||
| Port Map |
And that is it! You are done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.