Port Forwarding the Conceptronic C54BRS4A Router for Quake 2


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Conceptronic Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Conceptronic > C54BRS4A > Quake 2

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Conceptronic C54BRS4A router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the Conceptronic C54BRS4A Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Conceptronic C54BRS4A Router IP Address

It's ok if you don't know your Conceptronic C54BRS4A router's internal IP address. You can find it by doing one of the following:

Login To The Conceptronic C54BRS4A Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Conceptronic C54BRS4A Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Conceptronic C54BRS4A router. By default the IP address should be set to 192.168.0.1.

Conceptronic C54BRS4A Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Conceptronic C54BRS4A Router Username is: admin

The Default Conceptronic C54BRS4A Router Password is: 1234


Click the Ok button to log in to your Conceptronic C54BRS4A router.


Default Usernames and Passwords for other Conceptronic Routers

Please visit our Default Conceptronic Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Conceptronic C54BRS4A router username and password, use our How to Reset a Router Password guide to set your Conceptronic C54BRS4A router back to its factory settings.


How to Port Forward Quake 2 on the Conceptronic C54BRS4A


Having trouble forwarding ports on the Conceptronic C54BRS4A?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Conceptronic C54BRS4A router to save you time and hassle.

Conceptronic C54BRS4A Router Port Forwarding Screenshots

Now that you are logged in to your Conceptronic C54BRS4A router you should see the following:

Conceptronic C54BRS4A Screenshot 2

Click the Advanced button near the top of the page.

The menu on the left should change. In this new menu, click Virtual Server.

Conceptronic C54BRS4A Screenshot 3

Forward Ports 27910 on the Conceptronic C54BRS4A

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Quake 2 requires you to forward the 27910 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Apply.

Virtual Server :   Enabled Disabled
Name :  
Private IP Address :  
Protocol :  
Private Port :  
Public Port :  
Schedule :  

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for Quake 2 on the Conceptronic C54BRS4A you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Conceptronic C54BRS4A Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Conceptronic Router Screenshots. We have the Internets largest collection of Router Screenshots.