Port Forwarding the Cradlepoint MBR900 Router for QSee QC40198

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Cradlepoint Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Cradlepoint > MBR900 > QSee QC40198

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Cradlepoint MBR900 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Cradlepoint MBR900 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Cradlepoint MBR900 Router IP Address

It's ok if you don't know your Cradlepoint MBR900 router's internal IP address. You can find it by doing one of the following:

Login To The Cradlepoint MBR900 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Cradlepoint MBR900 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Cradlepoint MBR900 router. By default the IP address should be set to

Cradlepoint MBR900 Screenshot 1

We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!

Please visit our Default Router Passwords page if the username and password shown above do not work for you.

How to Port Forward QSee QC40198 on the Cradlepoint MBR900

Having trouble forwarding ports on the Cradlepoint MBR900?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Right Click and select Main Menu
  • Select Setting
  • Select Network
  • Check the box next to DHCP and click Save

Power Cycle the DVR

  • Select Shutdown
  • Set to Restart system and click OK

Identifying the IP address

  • Right Click and select Main Menu
  • Select Setting
  • Select Network
  • Uncheck the box next to DHCP, write down the IP Address, Subnet Mask, and Gateway, and click Save

Cradlepoint MBR900 Router Port Forwarding Screenshots

Now that you are logged in to your Cradlepoint MBR900 router you should see the following:

Cradlepoint MBR900 Screenshot 2

Click the Advanced button near the top of the page.

Cradlepoint MBR900 Screenshot 3

Click the Gaming button near the left of the page.

Cradlepoint MBR900 Screenshot 4

Forward Ports (80,37777)TCP, (37778)UDP on the Cradlepoint MBR900

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QC40198 requires you to forward the 80,37777 ports. Go ahead and enter the settings shown above into the Gaming menu and then click Save.

Enable :  
Name :  
IP Address :  
TCP Ports :  
UDP Ports :  
Schedule :  
Inbound Filter :  

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for QSee QC40198 on the Cradlepoint MBR900 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Cradlepoint MBR900 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Cradlepoint Router Screenshots. We have the Internets largest collection of Router Screenshots.