Port Forwarding the DSE-Dick Smith Elec XH7916-Rel9P-B1 Router for QSee QSDR16RTCB


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the DSE-Dick Smith Elec XH7916-Rel9P-B1 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the DSE-Dick Smith Elec XH7916-Rel9P-B1 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your DSE-Dick Smith Elec XH7916-Rel9P-B1 Router IP Address

It's ok if you don't know your DSE-Dick Smith Elec XH7916-Rel9P-B1 router's internal IP address. You can find it by doing one of the following:

Login To The DSE-Dick Smith Elec XH7916-Rel9P-B1 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

DSE-Dick Smith Elec XH7916-Rel9P-B1 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your DSE-Dick Smith Elec XH7916-Rel9P-B1 router. By default the IP address should be set to 192.168.1.2.

DSE-Dick Smith Elec XH7916-Rel9P-B1 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default DSE-Dick Smith Elec XH7916-Rel9P-B1 Router Username is: admin

The Default DSE-Dick Smith Elec XH7916-Rel9P-B1 Router Password is: password


Click the Ok button to log in to your DSE-Dick Smith Elec XH7916-Rel9P-B1 router.


Default Usernames and Passwords for other DSE-Dick Smith Elec Routers

Please visit our Default DSE-Dick Smith Elec Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your DSE-Dick Smith Elec XH7916-Rel9P-B1 router username and password, use our How to Reset a Router Password guide to set your DSE-Dick Smith Elec XH7916-Rel9P-B1 router back to its factory settings.


How to Port Forward QSee QSDR16RTCB on the DSE-Dick Smith Elec XH7916-Rel9P-B1


Having trouble forwarding ports on the DSE-Dick Smith Elec XH7916-Rel9P-B1?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your DSE-Dick Smith Elec XH7916-Rel9P-B1 router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select Network
  • Make sure Type is set to DHCP

  • Select Apply
  • Select Exit
The DVR will reboot & pick up an ip address from the router.


Identifying the IP address

  • Press Menu
  • Select Network
  • Write down the ip address, subnet mask & gateway.


Assign a Static IP

  • Change Type to Static
  • Input the same ip address, subnet mask & gateway - (you wrote down earlier).

  • Select Apply
  • Select Exit
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.

DSE-Dick Smith Elec XH7916-Rel9P-B1 Router Port Forwarding Screenshots

Now that you are logged in to your DSE-Dick Smith Elec XH7916-Rel9P-B1 router you should see the following:

DSE-Dick Smith Elec XH7916-Rel9P-B1 Screenshot 2

Click the Virtual Servers link near the left of the page.

DSE-Dick Smith Elec XH7916-Rel9P-B1 Screenshot 3

Forward Ports 80 on the DSE-Dick Smith Elec XH7916-Rel9P-B1

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSDR16RTCB requires you to forward the 80,9000 ports. Go ahead and enter the settings shown above into the Virtual Servers menu and then click Add Port Range.

MAP A PORT RANGE
ID# Start End Type IP Address
TCP
UDP


Forward Ports 9000 on the DSE-Dick Smith Elec XH7916-Rel9P-B1

You should see another page of settings that need to be entered into one of the blank lines on your routers Virutal Servers page. Go ahead and enter those settings and then click Add Port Range.

MAP A PORT RANGE
ID# Start End Type IP Address
TCP
UDP

Click the Save Settings link near the left of the page.

DSE-Dick Smith Elec XH7916-Rel9P-B1 Screenshot 4

When you're finished, click Save near the center of the screen to save your changes.

And that's it! You're done!


Test if Your Ports are Open

Now that you have forwarded ports for QSee QSDR16RTCB on the DSE-Dick Smith Elec XH7916-Rel9P-B1 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

DSE-Dick Smith Elec XH7916-Rel9P-B1 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.