Port Forwarding the Digicom MichelangeloWave-8E4371 Router for Command and Conquer 3 Kanes Wrath

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Digicom Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Digicom > MichelangeloWave-8E4371 > Command and Conquer 3 Kanes Wrath

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Digicom MichelangeloWave-8E4371 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Digicom MichelangeloWave-8E4371 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Digicom MichelangeloWave-8E4371 Router IP Address

It's ok if you don't know your Digicom MichelangeloWave-8E4371 router's internal IP address. You can find it by doing one of the following:

Login To The Digicom MichelangeloWave-8E4371 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Digicom MichelangeloWave-8E4371 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Digicom MichelangeloWave-8E4371 router. By default the IP address should be set to

Digicom MichelangeloWave-8E4371 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Digicom MichelangeloWave-8E4371 Router Username is: admin

The Default Digicom MichelangeloWave-8E4371 Router Password is: admin

Click the Ok button to log in to your Digicom MichelangeloWave-8E4371 router.

Default Usernames and Passwords for other Digicom Routers

Please visit our Default Digicom Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Digicom MichelangeloWave-8E4371 router username and password, use our How to Reset a Router Password guide to set your Digicom MichelangeloWave-8E4371 router back to its factory settings.

How to Port Forward Command and Conquer 3 Kanes Wrath on the Digicom MichelangeloWave-8E4371

Having trouble forwarding ports on the Digicom MichelangeloWave-8E4371?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Digicom MichelangeloWave-8E4371 Router Port Forwarding Screenshots

Now that you are logged in to your Digicom MichelangeloWave-8E4371 router you should see the following:

Digicom MichelangeloWave-8E4371 Screenshot 2

Click the Advanced Setup link near the top of the page.

You should now see a new menu. In this new menu, click NAT.

Digicom MichelangeloWave-8E4371 Screenshot 3

Click the Virtual Server link near the bottom of the page.

Digicom MichelangeloWave-8E4371 Screenshot 4

Forward Ports 8088-65535 on the Digicom MichelangeloWave-8E4371

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Command and Conquer 3 Kanes Wrath requires you to forward the 8088-65535 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Save.

Rule Index :
Application :
Protocol :
Start Port Number :
End Port Number :
Local IP Address :

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for Command and Conquer 3 Kanes Wrath on the Digicom MichelangeloWave-8E4371 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Digicom MichelangeloWave-8E4371 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Digicom Router Screenshots. We have the Internets largest collection of Router Screenshots.