To setup port forwarding on the Digitus DN-11004-N2 router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Digitus DN-11004-N2 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Digitus DN-11004-N2 router. By default the IP address should be set to 192.168.1.1.
Click the Ok button to log in to your Digitus DN-11004-N2 router.
Please visit our Default Digitus Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Digitus DN-11004-N2 router username and password, use our How to Reset a Router Password guide to set your Digitus DN-11004-N2 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Digitus DN-11004-N2 router to save you time and hassle.
Now that you are logged in to your Digitus DN-11004-N2 router you should see the following:
Click the Virtual Server link near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Demonik requires you to forward the following ports: 3074. Go ahead and enter the settings shown above into the Virtual Server Einstellungen menu.
|Auswahl||Weitergeleitete IP Addresse||Port Bereich||Protokoll|
|. . .|| ~ |
When you're finished, click Bestštigen near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for XBOX360 Demonik on the Digitus DN-11004-N2 you should test to see if your ports are forwarded correctly.