If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.
To setup port forwarding on the Dlink DFL-200 router your computer needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Dlink DFL-200 router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Dlink DFL-200 router. By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Log In button to log in to your Dlink DFL-200 router.
Please visit our Default Dlink Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Dlink DFL-200 router username and password, use our How to Reset a Router Password guide to set your Dlink DFL-200 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Dlink DFL-200 router to save you time and hassle.
Now that you are logged in to your Dlink DFL-200 router you should see the following:
Click the Firewall button near the top of the page.
Click the Port Mapping link near the left of the page.
Click the Add new link.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. TRENDnet TV-IP110WN requires you to forward the 80 ports. Go ahead and enter the settings shown above into the Port Mapping menu and then click Save.
|Port Mapping / Virtual Servers|
|Custom Source Ports:|
|Pass to Port:|
And that is it! You are done!
Now that you have forwarded ports for TRENDnet TV-IP110WN on the Dlink DFL-200 you should test to see if your ports are forwarded correctly.