Port Forwarding the Dlink DI-704P-revC Router for MySQL Server

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Dlink Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Dlink > DI-704P-revC > MySQL Server

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Dlink DI-704P-revC router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.0. <-- Don't Skip This Step!

Login to the Dlink DI-704P-revC Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Dlink DI-704P-revC Router IP Address

It's ok if you don't know your Dlink DI-704P-revC router's internal IP address. You can find it by doing one of the following:

Login To The Dlink DI-704P-revC Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Dlink DI-704P-revC Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Dlink DI-704P-revC router. By default the IP address should be set to

Dlink DI-704P-revC Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Dlink DI-704P-revC Router Username is: admin

The Default Dlink DI-704P-revC Router Password is: blank

Click the Ok button to log in to your Dlink DI-704P-revC router.

Default Usernames and Passwords for other Dlink Routers

Please visit our Default Dlink Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Dlink DI-704P-revC router username and password, use our How to Reset a Router Password guide to set your Dlink DI-704P-revC router back to its factory settings.

How to Port Forward MySQL Server on the Dlink DI-704P-revC

Having trouble forwarding ports on the Dlink DI-704P-revC?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Dlink DI-704P-revC Router Port Forwarding Screenshots

Now that you are logged in to your Dlink DI-704P-revC router you should see the following:

Dlink DI-704P-revC Screenshot 2

Click the Advanced button near the top of the page.

The menu on the left should change. In this new menu, click Virtual Server.

Dlink DI-704P-revC Screenshot 3

Forward Ports 3306 on the Dlink DI-704P-revC

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. MySQL Server requires you to forward the 3306 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Apply.

Enable Enable
Service Ports    Well known services: 
Service IP 192.168.0.
Schedule Always

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for MySQL Server on the Dlink DI-704P-revC you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Dlink DI-704P-revC Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Dlink Router Screenshots. We have the Internets largest collection of Router Screenshots.