Port Forwarding the Dlink DI-808HV Router for GeoVision RemotePlayBack

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Dlink DI-808HV Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Dlink > DI-808HV > GeoVision RemotePlayBack

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Dlink DI-808HV router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.0. <-- Don't Skip This Step!

Login to the Dlink DI-808HV Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Dlink DI-808HV Router IP Address

It's ok if you don't know your Dlink DI-808HV router's internal IP address. You can find it by doing one of the following:

Login To The Dlink DI-808HV Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Dlink DI-808HV Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Dlink DI-808HV router. By default the IP address should be set to

Dlink DI-808HV Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Dlink DI-808HV Router Username is: admin

The Default Dlink DI-808HV Router Password is: blank

Click the Ok button to log in to your Dlink DI-808HV router.

Default Usernames and Passwords for other Dlink Routers

Please visit our Default Dlink Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Dlink DI-808HV router username and password, use our How to Reset a Router Password guide to set your Dlink DI-808HV router back to its factory settings.

How to Port Forward GeoVision RemotePlayBack on the Dlink DI-808HV

Having trouble forwarding ports on the Dlink DI-808HV?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Dlink DI-808HV Router Port Forwarding Screenshots

Now that you are logged in to your Dlink DI-808HV router you should see the following:

Dlink DI-808HV Screenshot 2

Click the Advanced button near the top of the page.

The menu on the left should change. In this new menu, click Virtual Server.

Dlink DI-808HV Screenshot 3

Forward Ports 5066 on the Dlink DI-808HV

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. GeoVision RemotePlayBack requires you to forward the 5066 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Apply.

Private IP 192.168.0
Protocol Type
Private Port
Public Port
Schedule Always

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for GeoVision RemotePlayBack on the Dlink DI-808HV you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Dlink DI-808HV Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Dlink DI-808HV Router Screenshots. We have the Internets largest collection of Router Screenshots.