Port Forwarding the Dlink DIR-120 Router for GE Security TVR-1004-1T

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Dlink Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Dlink > DIR-120 > GE Security TVR-1004-1T

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Dlink DIR-120 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Dlink DIR-120 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Dlink DIR-120 Router IP Address

It's ok if you don't know your Dlink DIR-120 router's internal IP address. You can find it by doing one of the following:

Login To The Dlink DIR-120 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Dlink DIR-120 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Dlink DIR-120 router. By default the IP address should be set to

Dlink DIR-120 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Dlink DIR-120 Router Username is: admin

The Default Dlink DIR-120 Router Password is: blank

Click the Ok button to log in to your Dlink DIR-120 router.

Default Usernames and Passwords for other Dlink Routers

Please visit our Default Dlink Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Dlink DIR-120 router username and password, use our How to Reset a Router Password guide to set your Dlink DIR-120 router back to its factory settings.

How to Port Forward GE Security TVR-1004-1T on the Dlink DIR-120

Having trouble forwarding ports on the Dlink DIR-120?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Dlink DIR-120 Router Port Forwarding Screenshots

Now that you are logged in to your Dlink DIR-120 router you should see the following:

Dlink DIR-120 Screenshot 2

Click the Advanced button near the top of the page.

Dlink DIR-120 Screenshot 3

Forward Ports 80 on the Dlink DIR-120

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. GE Security TVR-1004-1T requires you to forward the following ports: 80,8000. Go ahead and enter the settings shown above into the Port Forwarding menu.

      Port Traffic Type
Public Port
IP Address
Private Port

Forward Ports 8000 on the Dlink DIR-120

You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding page. Go ahead and enter those settings now.

      Port Traffic Type
Public Port
IP Address
Private Port

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for GE Security TVR-1004-1T on the Dlink DIR-120 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Dlink DIR-120 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Dlink Router Screenshots. We have the Internets largest collection of Router Screenshots.