Port Forwarding the Dlink DSL-3780 Router for Echolink


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Dlink Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Dlink > DSL-3780 > Echolink

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Dlink DSL-3780 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Dlink DSL-3780 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Dlink DSL-3780 router. By default the IP address should be set to 192.168.1.1.

Dlink DSL-3780 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Dlink DSL-3780 Router Username is: admin

The Default Dlink DSL-3780 Router Password is: admin


Click the Ok button to log in to your Dlink DSL-3780 router.


Default Usernames and Passwords for other Dlink Routers

Please visit our Default Dlink Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Dlink DSL-3780 router username and password, use our How to Reset a Router Password guide to set your Dlink DSL-3780 router back to its factory settings.


Dlink DSL-3780 Screenshot 2

Click the Advanced Setup link near the top of the page.

The menu on the left should change. In this new menu, click Virtual Server.

Dlink DSL-3780 Screenshot 3

Forward Ports 5198-5200 on the Dlink DSL-3780

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Echolink requires you to forward the 5198-5200 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Add/Apply.

Enable Virtual Server Rules :
Interface :
Internal IP :
Internal startport :
Internal endport :
External startport :
External endport :
Protocol Type :
 

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for Echolink on the Dlink DSL-3780 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Dlink DSL-3780 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Dlink Router Screenshots. We have the Internets largest collection of Router Screenshots.