Port Forwarding the Dlink DSL-500Tv2 Router for QSee QSD9004VW2-320

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Dlink Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Dlink > DSL-500Tv2 > QSee QSD9004VW2-320

Login to the Dlink DSL-500Tv2 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Dlink DSL-500Tv2 Router IP Address

It's ok if you don't know your Dlink DSL-500Tv2 router's internal IP address. You can find it by doing one of the following:

Login To The Dlink DSL-500Tv2 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Dlink DSL-500Tv2 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Dlink DSL-500Tv2 router. By default the IP address should be set to

Dlink DSL-500Tv2 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Dlink DSL-500Tv2 Router Username is: admin

The Default Dlink DSL-500Tv2 Router Password is: admin

Click the Ok button to log in to your Dlink DSL-500Tv2 router.

Default Usernames and Passwords for other Dlink Routers

Please visit our Default Dlink Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Dlink DSL-500Tv2 router username and password, use our How to Reset a Router Password guide to set your Dlink DSL-500Tv2 router back to its factory settings.

How to Port Forward QSee QSD9004VW2-320 on the Dlink DSL-500Tv2

Having trouble forwarding ports on the Dlink DSL-500Tv2?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select Network
  • Make sure Type is set to DHCP

  • Select Apply
  • Select Exit
The DVR will reboot & pick up an ip address from the router.

Identifying the IP address

  • Press Menu
  • Select Network
  • Write down the ip address, subnet mask & gateway.

Assign a Static IP

  • Change Type to Static
  • Input the same ip address, subnet mask & gateway - (you wrote down earlier).

  • Select Apply
  • Select Exit
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.

Dlink DSL-500Tv2 Router Port Forwarding Screenshots

Now that you are logged in to your Dlink DSL-500Tv2 router you should see the following:

Dlink DSL-500Tv2 Screenshot 2

Click the Advanced link near the top of the page.

The menu on the left should change. In this new menu, click Virtual Server.

Dlink DSL-500Tv2 Screenshot 3

Put a dot into the User radio button.

Dlink DSL-500Tv2 Screenshot 4

Click the Add button near the bottom of the page.

Dlink DSL-500Tv2 Screenshot 5

Forward Ports 80 on the Dlink DSL-500Tv2

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSD9004VW2-320 requires you to forward the 80,9000 ports. Go ahead and enter the settings shown above into the Rule Managment menu and then click Apply.

Rule Name    
Port Start Port End
Port Map Port Map End

Forward Ports 9000 on the Dlink DSL-500Tv2

You should see another page of settings that need to be entered into one of the blank lines on your routers Rule Managment page. Go ahead and enter those settings and then click Apply.

Rule Name    
Port Start Port End
Port Map Port Map End
Dlink DSL-500Tv2 Screenshot 4

Select the applications you just created in the Available Rules list, then click the Add > button to move them to the Applied Rules box.

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for QSee QSD9004VW2-320 on the Dlink DSL-500Tv2 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Dlink DSL-500Tv2 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Dlink Router Screenshots. We have the Internets largest collection of Router Screenshots.