Port Forwarding World of Warcraft Downloader on the Dlink DSL-500Tv2

What is Port Forwarding?

View all Router Screenshots.

Home > Routers > Dlink > DSL-500Tv2 > World of Warcraft Downloader
DSL-500Tv2

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 192.168.1.1.

DSL-500Tv2

You should see a box prompting you for your username and password. Enter your username and password now. By default both the username and password are admin. Click the Ok button to log in to your router.

Please visit our Default Router Passwords page if the username and password shown above do not work for you.

DSL-500Tv2

Click the Advanced link near the top of the page.

The menu on the left should change. In this new menu, click Virtual Server.

DSL-500Tv2

Put a dot into the User radio button.

DSL-500Tv2

Click the Add button near the bottom of the page.

DSL-500Tv2



Entry #1

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. World of Warcraft Downloader requires you to forward the 1119-1120,3724,4000,6112-6114,6881-6999 ports. Go ahead and enter the settings shown above into the Rule Managment menu and then click Apply.

Rule Name    
Protocol    
Port Start Port End
Port Map Port Map End




Entry #2

You should see another page of settings that need to be entered into one of the blank lines on your routers Rule Managment page. Go ahead and enter those settings and then click Apply.

Rule Name    
Protocol    
Port Start Port End
Port Map Port Map End




Entry #3

You should see another page of settings that need to be entered into one of the blank lines on your routers Rule Managment page. Go ahead and enter those settings and then click Apply.

Rule Name    
Protocol    
Port Start Port End
Port Map Port Map End




Entry #4

You should see another page of settings that need to be entered into one of the blank lines on your routers Rule Managment page. Go ahead and enter those settings and then click Apply.

Rule Name    
Protocol    
Port Start Port End
Port Map Port Map End




Entry #5

You should see another page of settings that need to be entered into one of the blank lines on your routers Rule Managment page. Go ahead and enter those settings and then click Apply.

Rule Name    
Protocol    
Port Start Port End
Port Map Port Map End
DSL-500Tv2

Select the applications you just created in the Available Rules list, then click the Add > button to move them to the Applied Rules box.

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!


To test if your port has been properly forwarded, you can use our Port Checker tool.

Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.