Port Forwarding the Dlink DSL-502G Router for BitTornado


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Dlink Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Dlink > DSL-502G > BitTornado

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Dlink DSL-502G router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the Dlink DSL-502G Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Dlink DSL-502G Router IP Address

It's ok if you don't know your Dlink DSL-502G router's internal IP address. You can find it by doing one of the following:

Login To The Dlink DSL-502G Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Dlink DSL-502G Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Dlink DSL-502G router. By default the IP address should be set to 10.1.1.1.

Dlink DSL-502G Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Dlink DSL-502G Router Username is: admin

The Default Dlink DSL-502G Router Password is: admin


Click the Ok button to log in to your Dlink DSL-502G router.


Default Usernames and Passwords for other Dlink Routers

Please visit our Default Dlink Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Dlink DSL-502G router username and password, use our How to Reset a Router Password guide to set your Dlink DSL-502G router back to its factory settings.


How to Port Forward BitTornado on the Dlink DSL-502G


Having trouble forwarding ports on the Dlink DSL-502G?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Dlink DSL-502G router to save you time and hassle.

Since you are reading this guide, I'm going to assume that you have Bit Tornado installed. Open up Bit Tornado.

Close to the top you will see a Prefs link. Go ahead and click that link now.

The Port Range box defines the ports that Bit Tornado will use. These are the ports that you need to forward to your computer. Bit Tornado does not need the full 50,000 ports that come predefined. Go ahead and uncheck the Random checkbox. Enter 10000 into the From box, and enter 10010 into the To box. If you expect to download more than 10 files at the same time, then you should make this range of ports larger.

On this page there is a UPNP Port Forwarding drop down box. Open it up and set that box to disabled. We are not going to use UPNP to forward our ports. Now go find your router on our routers page, and forward the port range you set above.

Dlink DSL-502G Router Port Forwarding Screenshots

Now that you are logged in to your Dlink DSL-502G router you should see the following:

Dlink DSL-502G Screenshot 2

Click the Services button near the left of the page.

You should now see a new menu. In this new menu, click NAT.

Dlink DSL-502G Screenshot 3

Select NAT Rule Entry from the NAT Options drop down box.

Dlink DSL-502G Screenshot 4

Click the Add button near the bottom of the page.

Dlink DSL-502G Screenshot 5

Forward Ports 10000-10010 on the Dlink DSL-502G

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. BitTornado requires you to forward the 10000-10010 ports. Go ahead and enter the settings shown above into the NAT Rule Information menu and then click Submit.

Nat Rule Information
Rule Flavor:     
Rule ID:     
IF Name:     
Protocol:     
Local Address From:     
Local Address To:     
Global Address From:     
Global Address To:     
Destination Port From:        
Destination Port To:        
Local Port:        

Click the Admin link near the left of the page.

You should now see a new menu. In this new menu, click Commit and Reboot.

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for BitTornado on the Dlink DSL-502G you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Dlink DSL-502G Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Dlink Router Screenshots. We have the Internets largest collection of Router Screenshots.