Port Forwarding the Dlink DSL-504T Router for GeoVision RemotePlayBack

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Dlink DSL-504T Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Dlink > DSL-504T > GeoVision RemotePlayBack

Login to the Dlink DSL-504T Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Dlink DSL-504T Router IP Address

It's ok if you don't know your Dlink DSL-504T router's internal IP address. You can find it by doing one of the following:

Login To The Dlink DSL-504T Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Dlink DSL-504T Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Dlink DSL-504T router. By default the IP address should be set to

Dlink DSL-504T Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Dlink DSL-504T Router Username is: admin

The Default Dlink DSL-504T Router Password is: admin

Click the Ok button to log in to your Dlink DSL-504T router.

Default Usernames and Passwords for other Dlink Routers

Please visit our Default Dlink Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Dlink DSL-504T router username and password, use our How to Reset a Router Password guide to set your Dlink DSL-504T router back to its factory settings.

How to Port Forward GeoVision RemotePlayBack on the Dlink DSL-504T

Having trouble forwarding ports on the Dlink DSL-504T?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Dlink DSL-504T Router Port Forwarding Screenshots

Now that you are logged in to your Dlink DSL-504T router you should see the following:

Dlink DSL-504T Screenshot 2

Click the Advanced link near the top of the page.

The menu on the left should change. In this new menu, click Port Forwarding.

Dlink DSL-504T Screenshot 3

Put a dot into the User radio button.

Dlink DSL-504T Screenshot 4

Click the Add button near the bottom of the page.

Dlink DSL-504T Screenshot 5

Forward Ports 5066 on the Dlink DSL-504T

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. GeoVision RemotePlayBack requires you to forward the 5066 ports. Go ahead and enter the settings shown above into the Rule Managment menu and then click Apply.

Rule Name    
Port Start Port End
Port Map    
Dlink DSL-504T Screenshot 4

Select the applications you just created in the Available Rules list, then click the Add > button to move them to the Applied Rules box.

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for GeoVision RemotePlayBack on the Dlink DSL-504T you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Dlink DSL-504T Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Dlink DSL-504T Router Screenshots. We have the Internets largest collection of Router Screenshots.