Port Forwarding the Dlink DSL-520T Router for TRENDnet TV-IP110WN


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Dlink Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Dlink > DSL-520T > TRENDnet TV-IP110WN

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Dlink DSL-520T router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the Dlink DSL-520T Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Dlink DSL-520T Router IP Address

It's ok if you don't know your Dlink DSL-520T router's internal IP address. You can find it by doing one of the following:

Login To The Dlink DSL-520T Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Dlink DSL-520T Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Dlink DSL-520T router. By default the IP address should be set to 192.168.1.1.

Dlink DSL-520T Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Dlink DSL-520T Router Username is: admin

The Default Dlink DSL-520T Router Password is: admin


Click the Ok button to log in to your Dlink DSL-520T router.


Default Usernames and Passwords for other Dlink Routers

Please visit our Default Dlink Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Dlink DSL-520T router username and password, use our How to Reset a Router Password guide to set your Dlink DSL-520T router back to its factory settings.


How to Port Forward TRENDnet TV-IP110WN on the Dlink DSL-520T


Having trouble forwarding ports on the Dlink DSL-520T?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Dlink DSL-520T router to save you time and hassle.

Dlink DSL-520T Router Port Forwarding Screenshots

Now that you are logged in to your Dlink DSL-520T router you should see the following:

Dlink DSL-520T Screenshot 2

Click the Advanced link near the top of the page.

The menu on the left should change. In this new menu, click Virtual Server.

Dlink DSL-520T Screenshot 3

Put a dot into the User radio button.

Dlink DSL-520T Screenshot 4

Click the Add button near the bottom of the page.

Dlink DSL-520T Screenshot 5

Forward Ports 80 on the Dlink DSL-520T

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. TRENDnet TV-IP110WN requires you to forward the 80 ports. Go ahead and enter the settings shown above into the Rule Management menu and then click Apply.

Rule Name  
Protocol  
Port Start Port End
Port Map Port Map End

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for TRENDnet TV-IP110WN on the Dlink DSL-520T you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Dlink DSL-520T Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Dlink Router Screenshots. We have the Internets largest collection of Router Screenshots.