If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Dlink DSL-G624Tv2 router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Dlink DSL-G624Tv2 router. By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Dlink DSL-G624Tv2 router.
Please visit our Default Dlink Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Dlink DSL-G624Tv2 router username and password, use our How to Reset a Router Password guide to set your Dlink DSL-G624Tv2 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Dlink DSL-G624Tv2 router to save you time and hassle.
Now that you are logged in to your Dlink DSL-G624Tv2 router you should see the following:
Click the Advanced link near the top of the page.
The menu on the left should change. In this new menu, click Port Forwarding.
Put a dot into the User radio button.
Click the Add button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Point-to-Point Tunneling Protocol requires you to forward the 1723 ports. Go ahead and enter the settings shown above into the Rule Management menu and then click Add/Apply.
|Port Map Start|
|Port Map End|
Select the applications you just created in the Application Name list, then click the Add button to move them to the Active Port Forwarding Rules box.
When you're finished, click Reboot near the left of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Point-to-Point Tunneling Protocol on the Dlink DSL-G624Tv2 you should test to see if your ports are forwarded correctly.