Port Forwarding the Dlink DVG-1402S Router for Falco LX-4PRO

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Dlink Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Dlink > DVG-1402S > Falco LX-4PRO

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Dlink DVG-1402S router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Dlink DVG-1402S Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Dlink DVG-1402S Router IP Address

It's ok if you don't know your Dlink DVG-1402S router's internal IP address. You can find it by doing one of the following:

Login To The Dlink DVG-1402S Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Dlink DVG-1402S Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Dlink DVG-1402S router. By default the IP address should be set to

Dlink DVG-1402S Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Dlink DVG-1402S Router Username is: admin

The Default Dlink DVG-1402S Router Password is: admin

Click the Ok button to log in to your Dlink DVG-1402S router.

Default Usernames and Passwords for other Dlink Routers

Please visit our Default Dlink Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Dlink DVG-1402S router username and password, use our How to Reset a Router Password guide to set your Dlink DVG-1402S router back to its factory settings.

How to Port Forward Falco LX-4PRO on the Dlink DVG-1402S

Having trouble forwarding ports on the Dlink DVG-1402S?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Dlink DVG-1402S router to save you time and hassle.

(This guide is for the
Falco LX-4PRO Gen 1)

Dlink DVG-1402S Router Port Forwarding Screenshots

Now that you are logged in to your Dlink DVG-1402S router you should see the following:

Dlink DVG-1402S Screenshot 2

Click the Configure LAN/WAN Access link near the left of the page.

You should now see a new menu. In this new menu, click Configure Lan Port.

You should now see a new menu. In this new menu, click Nat Configuration.

You should now see a new menu. In this new menu, click Virtual Server Configuration.

Dlink DVG-1402S Screenshot 3

Click the Edit button near the right of the page.

Dlink DVG-1402S Screenshot 4

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Falco LX-4PRO requires you to forward the AppFullPortsListTag ports. Go ahead and enter the settings shown above into the Virtual Server Configuration menu and then click Save.

Test if Your Ports are Open

Now that you have forwarded ports for Falco LX-4PRO on the Dlink DVG-1402S you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Dlink DVG-1402S Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Dlink Router Screenshots. We have the Internets largest collection of Router Screenshots.