Port Forwarding the Dlink VWR-11.4.0 Router for Jamcast


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Dlink Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Dlink > VWR-11.4.0 > Jamcast

Login to the Dlink VWR-11.4.0 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Dlink VWR-11.4.0 Router IP Address

It's ok if you don't know your Dlink VWR-11.4.0 router's internal IP address. You can find it by doing one of the following:

Login To The Dlink VWR-11.4.0 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Dlink VWR-11.4.0 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Dlink VWR-11.4.0 router. By default the IP address should be set to 192.168.15.1.

Dlink VWR-11.4.0 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Dlink VWR-11.4.0 Router Username is: user

The Default Dlink VWR-11.4.0 Router Password is: user


Click the Ok button to log in to your Dlink VWR-11.4.0 router.


Default Usernames and Passwords for other Dlink Routers

Please visit our Default Dlink Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Dlink VWR-11.4.0 router username and password, use our How to Reset a Router Password guide to set your Dlink VWR-11.4.0 router back to its factory settings.


How to Port Forward Jamcast on the Dlink VWR-11.4.0


Having trouble forwarding ports on the Dlink VWR-11.4.0?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Dlink VWR-11.4.0 router to save you time and hassle.

Dlink VWR-11.4.0 Router Port Forwarding Screenshots

Now that you are logged in to your Dlink VWR-11.4.0 router you should see the following:

Dlink VWR-11.4.0 Screenshot 2

Click the Advanced button near the top of the page.

Dlink VWR-11.4.0 Screenshot 3

Put a dot into the User radio button.

Dlink VWR-11.4.0 Screenshot 4

Click the New button near the bottom of the page.

Dlink VWR-11.4.0 Screenshot 5

Forward Ports 58642 on the Dlink VWR-11.4.0

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Jamcast requires you to forward the 58642 ports. Go ahead and enter the settings shown above into the Rule Management menu and then click Apply.

Rule Name:
Protocol:
Port Start: Port End:
Port Map:
Dlink VWR-11.4.0 Screenshot 4

Select the applications you just created in the Available Rules list, then click the Add button to move them to the Applied Rules box.

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!


Test if Your Ports are Open

Now that you have forwarded ports for Jamcast on the Dlink VWR-11.4.0 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Dlink VWR-11.4.0 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Dlink Router Screenshots. We have the Internets largest collection of Router Screenshots.