Port Forwarding the Draytek Vigor-2800G Router for Gadspot IP Camera

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Draytek Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Draytek > Vigor-2800G > Gadspot IP Camera

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Draytek Vigor-2800G router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.1. <-- Don't Skip This Step!

Login to the Draytek Vigor-2800G Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Draytek Vigor-2800G Router IP Address

It's ok if you don't know your Draytek Vigor-2800G router's internal IP address. You can find it by doing one of the following:

Login To The Draytek Vigor-2800G Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Draytek Vigor-2800G Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Draytek Vigor-2800G router. By default the IP address should be set to

Draytek Vigor-2800G Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Draytek Vigor-2800G Router Username is: admin

The Default Draytek Vigor-2800G Router Password is: admin

Click the Ok button to log in to your Draytek Vigor-2800G router.

Default Usernames and Passwords for other Draytek Routers

Please visit our Default Draytek Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Draytek Vigor-2800G router username and password, use our How to Reset a Router Password guide to set your Draytek Vigor-2800G router back to its factory settings.

How to Port Forward Gadspot IP Camera on the Draytek Vigor-2800G

Having trouble forwarding ports on the Draytek Vigor-2800G?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Draytek Vigor-2800G Router Port Forwarding Screenshots

Now that you are logged in to your Draytek Vigor-2800G router you should see the following:

Draytek Vigor-2800G Screenshot 2

Click the NAT link near the left of the page.

Click the Port Redirection link.

Draytek Vigor-2800G Screenshot 3

Forward Ports 80 on the Draytek Vigor-2800G

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Gadspot IP Camera requires you to forward the following ports: 80. Go ahead and enter the settings shown above into the Configure Port Redirection Table menu.

Index Service Name Protocol Public Port Private IP Private Port Active
1 192.168.1.

When you're finished, click OK near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for Gadspot IP Camera on the Draytek Vigor-2800G you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Draytek Vigor-2800G Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Draytek Router Screenshots. We have the Internets largest collection of Router Screenshots.