Port Forwarding the Draytek Vigor2200E Router for QSee QR424-411-3

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Draytek Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Draytek > Vigor2200E > QSee QR424-411-3

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Draytek Vigor2200E router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.1. <-- Don't Skip This Step!

Login to the Draytek Vigor2200E Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Draytek Vigor2200E Router IP Address

It's ok if you don't know your Draytek Vigor2200E router's internal IP address. You can find it by doing one of the following:

Login To The Draytek Vigor2200E Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Draytek Vigor2200E Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Draytek Vigor2200E router. By default the IP address should be set to

Draytek Vigor2200E Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Draytek Vigor2200E Router Username is: blank

The Default Draytek Vigor2200E Router Password is: blank

Click the Ok button to log in to your Draytek Vigor2200E router.

Default Usernames and Passwords for other Draytek Routers

Please visit our Default Draytek Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Draytek Vigor2200E router username and password, use our How to Reset a Router Password guide to set your Draytek Vigor2200E router back to its factory settings.

How to Port Forward QSee QR424-411-3 on the Draytek Vigor2200E

Having trouble forwarding ports on the Draytek Vigor2200E?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select Network
  • Make sure Type is set to DHCP

  • Select Apply
  • Select Exit
The DVR will reboot & pick up an ip address from the router.

Identifying the IP address

  • Press Menu
  • Select Network
  • Write down the ip address, subnet mask & gateway.

Assign a Static IP

  • Change Type to Static
  • Input the same ip address, subnet mask & gateway - (you wrote down earlier).

  • Select Apply
  • Select Exit
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.

Draytek Vigor2200E Router Port Forwarding Screenshots

Now that you are logged in to your Draytek Vigor2200E router you should see the following:

Draytek Vigor2200E Screenshot 2

Click the NAT Setup link.

Draytek Vigor2200E Screenshot 3

Click the Open Ports Setup link.

Draytek Vigor2200E Screenshot 4

Click on a Index number that has not been used.

Draytek Vigor2200E Screenshot 5

Forward Ports 80 on the Draytek Vigor2200E

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QR424-411-3 requires you to forward the 80,9000 ports. Go ahead and enter the settings shown above into the Open Ports Setup menu and then click Ok.

Enable Open Ports
Local Computer . . .
  Protocol Start Port End Port

Forward Ports 9000 on the Draytek Vigor2200E

You should see another page of settings that need to be entered into one of the blank lines on your routers Open Ports Setup page. Go ahead and enter those settings and then click Ok.

Enable Open Ports
Local Computer . . .
  Protocol Start Port End Port

When you're finished, click Ok near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for QSee QR424-411-3 on the Draytek Vigor2200E you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Draytek Vigor2200E Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Draytek Router Screenshots. We have the Internets largest collection of Router Screenshots.