To setup port forwarding on the Draytek Vigor2930 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Draytek Vigor2930 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Draytek Vigor2930 router. By default the IP address should be set to 192.168.1.1.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
Now that you are logged in to your Draytek Vigor2930 router you should see the following:
Click the NAT link near the left of the page.
You should now see a new menu. In this new menu, click Port Redirection.
Click the Index Number link near the center of the page.
This router has two different sections that allow you to forward ports. One section allows you to forward a range of ports, and the other allows you to forward a single port. To forward a range of ports, click Range. To forward a single port, click Single.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Recoil Retrograd requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Port Redirection menu and then click Ok.
You should see another page of settings that need to be entered into one of the blank lines on your routers Port Redirection page. Go ahead and enter those settings and then click Ok.
Now that you have forwarded ports for XBOX360 Recoil Retrograd on the Draytek Vigor2930 you should test to see if your ports are forwarded correctly.