Port Forwarding the Dynalink RTA1335 Router for Synology DS107


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Dynalink Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Dynalink > RTA1335 > Synology DS107

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Dynalink RTA1335 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the Dynalink RTA1335 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Dynalink RTA1335 Router IP Address

It's ok if you don't know your Dynalink RTA1335 router's internal IP address. You can find it by doing one of the following:

Login To The Dynalink RTA1335 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Dynalink RTA1335 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Dynalink RTA1335 router. By default the IP address should be set to 192.168.1.1.

Dynalink RTA1335 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Dynalink RTA1335 Router Username is: admin

The Default Dynalink RTA1335 Router Password is: admin


Click the Ok button to log in to your Dynalink RTA1335 router.


Default Usernames and Passwords for other Dynalink Routers

Please visit our Default Dynalink Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Dynalink RTA1335 router username and password, use our How to Reset a Router Password guide to set your Dynalink RTA1335 router back to its factory settings.


How to Port Forward Synology DS107 on the Dynalink RTA1335


Having trouble forwarding ports on the Dynalink RTA1335?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Dynalink RTA1335 router to save you time and hassle.

Dynalink RTA1335 Router Port Forwarding Screenshots

Now that you are logged in to your Dynalink RTA1335 router you should see the following:

Dynalink RTA1335 Screenshot 2

Click the Advanced link near the top of the page.

Dynalink RTA1335 Screenshot 3

Click the Virtual Server link near the left of the page.

You should now see a new menu. In this new menu, click Port Forwarding.

Dynalink RTA1335 Screenshot 4

Click the Add button near the bottom of the page.

Dynalink RTA1335 Screenshot 5

Forward Ports 20-22 on the Dynalink RTA1335

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Synology DS107 requires you to forward the 20-22,25,80,110-111,137-139,143,443,445,548,873,892,993,995,2049,3260,4662,4672,5000-5001,5005-5006,5432,6881-6999,7000-7001,9997-9999,55536-55663,55736-55863 ports. Go ahead and enter the settings shown above into the Apply menu and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 25 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 80 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 110-111 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 137-139 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 143 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 443 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 445 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 548 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 873 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 892 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 993 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 995 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 2049 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 3260 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 4672 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 5000-5001 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 5005-5006 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 5432 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 6881-6999 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 7000-7001 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 9997-9999 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 55536-55663 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 55736-55863 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 25 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 110-111 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 137-139 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 143 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 445 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 892 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 993 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 995 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 2049 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 4662 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 4672 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 5432 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 6881-6999 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 9997-9999 on the Dynalink RTA1335

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for Synology DS107 on the Dynalink RTA1335 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Dynalink RTA1335 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Dynalink Router Screenshots. We have the Internets largest collection of Router Screenshots.