Port Forwarding the Dynalink RTA230 Router for QNAP TS-419P


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Dynalink Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Dynalink > RTA230 > QNAP TS-419P

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Dynalink RTA230 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the Dynalink RTA230 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Dynalink RTA230 Router IP Address

It's ok if you don't know your Dynalink RTA230 router's internal IP address. You can find it by doing one of the following:

Login To The Dynalink RTA230 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Dynalink RTA230 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Dynalink RTA230 router. By default the IP address should be set to 192.168.1.1.

Dynalink RTA230 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Dynalink RTA230 Router Username is: admin

The Default Dynalink RTA230 Router Password is: admin


Click the Ok button to log in to your Dynalink RTA230 router.


Default Usernames and Passwords for other Dynalink Routers

Please visit our Default Dynalink Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Dynalink RTA230 router username and password, use our How to Reset a Router Password guide to set your Dynalink RTA230 router back to its factory settings.


How to Port Forward QNAP TS-419P on the Dynalink RTA230


Having trouble forwarding ports on the Dynalink RTA230?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Dynalink RTA230 router to save you time and hassle.

Dynalink RTA230 Router Port Forwarding Screenshots

Now that you are logged in to your Dynalink RTA230 router you should see the following:

Dynalink RTA230 Screenshot 2

Click the Advanced link near the top of the page.

Dynalink RTA230 Screenshot 3

Click the Virtual Server link near the left of the page.

You should now see a new menu. In this new menu, click Port Forwarding.

Dynalink RTA230 Screenshot 4

Click the Add button near the bottom of the page.

Dynalink RTA230 Screenshot 5

Forward Ports 21-22 on the Dynalink RTA230

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QNAP TS-419P requires you to forward the 21-22,25,80,443,445,873,3306,6881-6999,8080,9000,13131,55536-56559 ports. Go ahead and enter the settings shown above into the Apply menu and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 25 on the Dynalink RTA230

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 80 on the Dynalink RTA230

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 443 on the Dynalink RTA230

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 445 on the Dynalink RTA230

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 873 on the Dynalink RTA230

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 3306 on the Dynalink RTA230

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 6881-6999 on the Dynalink RTA230

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 8080 on the Dynalink RTA230

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 9000 on the Dynalink RTA230

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 13131 on the Dynalink RTA230

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 55536-56559 on the Dynalink RTA230

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End


Forward Ports 6881-6999 on the Dynalink RTA230

You should see another page of settings that need to be entered into one of the blank lines on your routers Apply page. Go ahead and enter those settings and then click Add New Port Forwarding Rule.

Pre-defined:
User defined:

Forward to Internal Host IP Address:

By using the rules:
Protocol External Packet Forward to Internal Host
Port Start Port End Port Start Port End

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for QNAP TS-419P on the Dynalink RTA230 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Dynalink RTA230 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Dynalink Router Screenshots. We have the Internets largest collection of Router Screenshots.