Port Forwarding the Dynalink RTA770 Router for EQOA

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Dynalink Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Dynalink > RTA770 > EQOA

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Dynalink RTA770 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Dynalink RTA770 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Dynalink RTA770 Router IP Address

It's ok if you don't know your Dynalink RTA770 router's internal IP address. You can find it by doing one of the following:

Login To The Dynalink RTA770 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Dynalink RTA770 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Dynalink RTA770 router. By default the IP address should be set to

Dynalink RTA770 Screenshot 1

You should see a box prompting you for your Dynalink RTA770 password. Enter the password now.

The Default Dynalink RTA770 Router Password is:

Click the button to log in to your Dynalink RTA770 router.

Default Usernames and Passwords for other Dynalink Routers

Please visit our Default Dynalink Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Dynalink RTA770 router password, use our How to Reset a Router Password guide to set your Dynalink RTA770 router back to its factory settings.

How to Port Forward EQOA on the Dynalink RTA770

Having trouble forwarding ports on the Dynalink RTA770?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Dynalink RTA770 router to save you time and hassle.

Dynalink RTA770 Router Port Forwarding Screenshots

Now that you are logged in to your Dynalink RTA770 router you should see the following:

Dynalink RTA770 Screenshot 2

Click the Advanced button near the top of the page.

Dynalink RTA770 Screenshot 3

Click the Virtual Server link near the left of the page.

You should now see a new menu. In this new menu, click Port Forwarding.

Click the Add button.

Dynalink RTA770 Screenshot 4

Forward Ports 10070-10080 on the Dynalink RTA770

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. EQOA requires you to forward the 10070-10080 ports. Go ahead and enter the settings shown above into the Add New Port Forwarding Rule menu and then click Apply.

User defined:
Forward to Internal Host IP Address
By using the rules:
  External Packet Forward to Internal Host
Protocol Port Start Port End Port Start Port End

And that is it! You are done!

Test if Your Ports are Open

Now that you have forwarded ports for EQOA on the Dynalink RTA770 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Dynalink RTA770 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Dynalink Router Screenshots. We have the Internets largest collection of Router Screenshots.