Port Forwarding the Dynamode R-ADSL-C4 Router for Qsee QSTD2416C8-320

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Dynamode Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Dynamode > R-ADSL-C4 > Qsee QSTD2416C8-320

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Dynamode R-ADSL-C4 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Dynamode R-ADSL-C4 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Dynamode R-ADSL-C4 Router IP Address

It's ok if you don't know your Dynamode R-ADSL-C4 router's internal IP address. You can find it by doing one of the following:

Login To The Dynamode R-ADSL-C4 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Dynamode R-ADSL-C4 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Dynamode R-ADSL-C4 router. By default the IP address should be set to

Dynamode R-ADSL-C4 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Dynamode R-ADSL-C4 Router Username is: admin

The Default Dynamode R-ADSL-C4 Router Password is: conexant

Click the Ok button to log in to your Dynamode R-ADSL-C4 router.

Default Usernames and Passwords for other Dynamode Routers

Please visit our Default Dynamode Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Dynamode R-ADSL-C4 router username and password, use our How to Reset a Router Password guide to set your Dynamode R-ADSL-C4 router back to its factory settings.

How to Port Forward Qsee QSTD2416C8-320 on the Dynamode R-ADSL-C4

Having trouble forwarding ports on the Dynamode R-ADSL-C4?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Dynamode R-ADSL-C4 router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select System

  • Select Network

  • Put a check in the DHCP box.
  • Select OK.

  • Exit out to the live cameras by pressing the ESC button on the DVR.

Power Cycle the DVR

  • Remove the power cable from the back of the dvr.
  • Wait 20 seconds.
  • Plug in the power cable.

Identifying the IP address

  • Press Menu
  • Select Info
  • Select Network

  • Write down the IP address, subnet mask & gateway found on your info network screen.

Assign a Static IP

  • Press Menu
  • Select System

  • Select Network

  • Remove the check from the DHCP box.
  • Input the same IP address, subnet mask & gateway - (you wrote down earlier).

  • Select ok

Dynamode R-ADSL-C4 Router Port Forwarding Screenshots

Now that you are logged in to your Dynamode R-ADSL-C4 router you should see the following:

Dynamode R-ADSL-C4 Screenshot 2

Click the Virtual Server link near the left of the page.

Dynamode R-ADSL-C4 Screenshot 3

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Qsee QSTD2416C8-320 requires you to forward the AppFullPortsListTag ports. Go ahead and enter the settings shown above into the Virtual Server Configuration menu and then click Add This Setting.

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server Configuration page. Go ahead and enter those settings and then click Add This Setting.

When you're finished, click Save Settings / Reboot near the left of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for Qsee QSTD2416C8-320 on the Dynamode R-ADSL-C4 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Dynamode R-ADSL-C4 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Dynamode Router Screenshots. We have the Internets largest collection of Router Screenshots.