To setup port forwarding on the Dynex DX-E401 router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Dynex DX-E401 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Dynex DX-E401 router. By default the IP address should be set to 192.168.0.1.
Click the Ok button to log in to your Dynex DX-E401 router.
Please visit our Default Dynex Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Dynex DX-E401 router username and password, use our How to Reset a Router Password guide to set your Dynex DX-E401 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.
Now that you are logged in to your Dynex DX-E401 router you should see the following:
Click the Advanced button near the top of the page.
The menu on the left should change. In this new menu, click Virtual Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 TotemBall requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Apply.
And that is it! You are done!
Now that you have forwarded ports for XBOX360 TotemBall on the Dynex DX-E401 you should test to see if your ports are forwarded correctly.