Port Forwarding the Dynex DX-WEGRTR Router for QSee QSD2216C16-250


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Dynex Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Dynex > DX-WEGRTR > QSee QSD2216C16-250

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Dynex DX-WEGRTR router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

192.168.2. <-- Don't Skip This Step!

Login to the Dynex DX-WEGRTR Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Dynex DX-WEGRTR Router IP Address

It's ok if you don't know your Dynex DX-WEGRTR router's internal IP address. You can find it by doing one of the following:

Login To The Dynex DX-WEGRTR Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Dynex DX-WEGRTR Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Dynex DX-WEGRTR router. By default the IP address should be set to 192.168.2.1.

Dynex DX-WEGRTR Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Dynex DX-WEGRTR Router Username is: blank

The Default Dynex DX-WEGRTR Router Password is: blank


Click the Ok button to log in to your Dynex DX-WEGRTR router.


Default Usernames and Passwords for other Dynex Routers

Please visit our Default Dynex Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Dynex DX-WEGRTR router username and password, use our How to Reset a Router Password guide to set your Dynex DX-WEGRTR router back to its factory settings.


How to Port Forward QSee QSD2216C16-250 on the Dynex DX-WEGRTR


Having trouble forwarding ports on the Dynex DX-WEGRTR?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Dynex DX-WEGRTR router to save you time and hassle.

Before we can forward ports to your DVR, we need to change some settings in your DVR. Use your remote control to enter your DVR's System Setup menu.

Select the Network option from the System Setup menu.

Write down the number that is in the IP ADDR, Gateway, and Sub Net sections. Change the IP Mode to STATIC IP. Do not change the Gateway and Sub Net settings. We are going to create static ip address for your DVR and use it from now on. The IP address in the picture above is 192.168.001.111. The 111 portion of that ip address is called the last octet. Each octet of an ip address ranges from 1 to 254. If you have an ip address where the last octet is closer to 1 than 254, add 50 to the last octet and set the IP ADDR to that. If you have an ip address that is closer to 254 than 1, subtract 50 from that last octet and set the IP ADDR to that. Save the settings and get out of your DVR's setup. In this example the last octet was 111. So the new octet in this example would be 161, and the ip address in this example would be 192.168.001.161. Do not use those values they are just an example.

You will need to restart your DVR before those settings will take effect.

Remember what you set the IP ADDR to. You will need to tell your router what IP Address to forward those ports to. Since you want to forward ports to your DVR you will need your DVR's IP address.

We've already taken care of setting up the static ip address in the guide below so you don't need to worry about that part. Just enter your DVR's static ip address that we just setup in to the box requesting your computer's ip address bellow. You won't really be forwarding ports to your computer, but you will be forwarding them to your DVR. Everything else is the same, just keep in mind that the ports will end up being forwarded to your DVR and not your computer.

Dynex DX-WEGRTR Router Port Forwarding Screenshots

Now that you are logged in to your Dynex DX-WEGRTR router you should see the following:

Dynex DX-WEGRTR Screenshot 2

Click the Virtual Servers link near the left of the page.

Dynex DX-WEGRTR Screenshot 3

Forward Ports 80 on the Dynex DX-WEGRTR

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSD2216C16-250 requires you to forward the following ports: 80,5000-5001. Go ahead and enter the settings shown above into the Virtual Servers menu.

  Enable Description Inbound Port Type Private IP Address Private Port
1. - 192.168.2. -


Forward Ports 5000-5001 on the Dynex DX-WEGRTR

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Servers page. Go ahead and enter those settings now.

  Enable Description Inbound Port Type Private IP Address Private Port
2. - 192.168.2. -

When you're finished, click Apply Changes near the top of the screen to save your changes.

And that's it! You're done!


Test if Your Ports are Open

Now that you have forwarded ports for QSee QSD2216C16-250 on the Dynex DX-WEGRTR you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Dynex DX-WEGRTR Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Dynex Router Screenshots. We have the Internets largest collection of Router Screenshots.