Port Forwarding the Edimax AR-7064G+A Router for QSee QR DVRs


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Edimax Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Edimax > AR-7064G+A > QSee QR DVRs

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Edimax AR-7064G+A router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the Edimax AR-7064G+A Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Edimax AR-7064G+A Router IP Address

It's ok if you don't know your Edimax AR-7064G+A router's internal IP address. You can find it by doing one of the following:

Login To The Edimax AR-7064G+A Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Edimax AR-7064G+A Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Edimax AR-7064G+A router. By default the IP address should be set to 192.168.16.1.

Edimax AR-7064G+A Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Edimax AR-7064G+A Router Username is: admin

The Default Edimax AR-7064G+A Router Password is: admin


Click the Ok button to log in to your Edimax AR-7064G+A router.


Default Usernames and Passwords for other Edimax Routers

Please visit our Default Edimax Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Edimax AR-7064G+A router username and password, use our How to Reset a Router Password guide to set your Edimax AR-7064G+A router back to its factory settings.


How to Port Forward QSee QR DVRs on the Edimax AR-7064G+A


Having trouble forwarding ports on the Edimax AR-7064G+A?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Edimax AR-7064G+A router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select Network
  • Make sure Type is set to DHCP

  • Select Apply
  • Select Exit
The DVR will reboot & pick up an ip address from the router.


Identifying the IP address

  • Press Menu
  • Select Network
  • Write down the ip address, subnet mask & gateway.


Assign a Static IP

  • Change Type to Static
  • Input the same ip address, subnet mask & gateway - (you wrote down earlier).

  • Select Apply
  • Select Exit
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.

Edimax AR-7064G+A Router Port Forwarding Screenshots

Now that you are logged in to your Edimax AR-7064G+A router you should see the following:

Edimax AR-7064G+A Screenshot 2

Click the Advanced Setup link near the top of the page.

Edimax AR-7064G+A Screenshot 3

Click the NAT link near the top of the page.

Edimax AR-7064G+A Screenshot 4

Click the Virtual Server link near the bottom of the page.

Edimax AR-7064G+A Screenshot 5

Forward Ports 80 on the Edimax AR-7064G+A

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QR DVRs requires you to forward the 80,9000 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Save.

Rule Index :
Application :
Start Port Number :
End Port Number :
Local IP Address :


Forward Ports 9000 on the Edimax AR-7064G+A

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings and then click Save.

Rule Index :
Application :
Start Port Number :
End Port Number :
Local IP Address :

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for QSee QR DVRs on the Edimax AR-7064G+A you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Edimax AR-7064G+A Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Edimax Router Screenshots. We have the Internets largest collection of Router Screenshots.