Port Forwarding NetX RP32-WIFI Thermostat on the Edimax AR7000

What is Port Forwarding?

View all Router Screenshots.

Home > Routers > Edimax > AR7000 > NetX RP32-WIFI Thermostat

To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for you.

Or you can take alook at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

192.168.1.
AR7000

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 192.168.1.1.

AR7000

You should see a box prompting you for your username and password. Enter your username and password now. By default both the username and password are root. Click the Ok button to log in to your router.

Please visit our Default Router Passwords page if the username and password shown above do not work for you.

AR7000

Click the Services button near the top of the page.

AR7000

Select NAT Rule Entry from the NAT Options drop down box.

AR7000

Click the Add button near the bottom of the page.

AR7000



Entry #1

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. NetX RP32-WIFI Thermostat requires you to forward the 81-89,10001-10019 ports. Go ahead and enter the settings shown above into the NAT Rule - Add menu and then click Submit.

Nat Rule Information
Rule Flavor:     
Rule ID:     
IF Name:     
Protocol:     
Local Address From:     
Local Address To:     
Global Address From:     
Global Address To:     
Destination Port From:        
Destination Port To:        
Local Port:        




Entry #2

You should see another page of settings that need to be entered into one of the blank lines on your routers NAT Rule - Add page. Go ahead and enter those settings and then click Submit.

Nat Rule Information
Rule Flavor:     
Rule ID:     
IF Name:     
Protocol:     
Local Address From:     
Local Address To:     
Global Address From:     
Global Address To:     
Destination Port From:        
Destination Port To:        
Local Port:        
AR7000

Click the Close button near the bottom of the page.

Click the IP Filter link near the top of the page.

AR7000

Select Low from the Security Level drop down box.

Select Accept from the Public Default Action, Private Default Action and DMZ Default Action drop down box.

Click the Submit button near the bottom of the page.

Click the Admin button near the top of the page.

You should now see a new menu. In this new menu, click Commit & Reboot.

AR7000

Click the Commit button near the bottom of the page.

Click the Reboot button near the bottom of the page.

And that is it! You are done!


To test if your port has been properly forwarded, you can use our Port Checker tool.

Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.