Port Forwarding the Edimax ER-1088 Router for Worms Armageddon


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Edimax Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Edimax > ER-1088 > Worms Armageddon

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Edimax ER-1088 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the Edimax ER-1088 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Edimax ER-1088 Router IP Address

It's ok if you don't know your Edimax ER-1088 router's internal IP address. You can find it by doing one of the following:

Login To The Edimax ER-1088 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Edimax ER-1088 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Edimax ER-1088 router. By default the IP address should be set to 192.168.0.1.

Edimax ER-1088 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Edimax ER-1088 Router Username is: admin

The Default Edimax ER-1088 Router Password is: blank


Click the Ok button to log in to your Edimax ER-1088 router.


Default Usernames and Passwords for other Edimax Routers

Please visit our Default Edimax Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Edimax ER-1088 router username and password, use our How to Reset a Router Password guide to set your Edimax ER-1088 router back to its factory settings.


How to Port Forward Worms Armageddon on the Edimax ER-1088


Having trouble forwarding ports on the Edimax ER-1088?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Edimax ER-1088 router to save you time and hassle.

Edimax ER-1088 Router Port Forwarding Screenshots

Now that you are logged in to your Edimax ER-1088 router you should see the following:

Edimax ER-1088 Screenshot 2

Click the Advanced Configuration button near the left of the page.

You should now see a new menu. In this new menu, click Virtual Server.

Edimax ER-1088 Screenshot 3

Forward Ports 17011 on the Edimax ER-1088

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Worms Armageddon requires you to forward the 17011 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Add.

Enabled Server_Name Protocol IP Address Port Range Allowed Remote IP
LAN ~ From
WAN ~ To

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for Worms Armageddon on the Edimax ER-1088 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Edimax ER-1088 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Edimax Router Screenshots. We have the Internets largest collection of Router Screenshots.