Free Port Forwarding Guides & PFConfig: Forward Your Ports Automatically
Port Forwarding 3CX on the Efficient-Siemens Speedstream-5100
To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for your computer.
Or you can take a look at our Static IP Address guide to setup a static ip address.
When you are finished setting up a static ip address, please come back to this page and enter
the ip address you setup in the Static IP Address box below.
Do not skip this step!
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router.
By default the IP address should be set to 192.168.254.254.
Click the Setup link.
Click the Port Forwarding link.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. 3CX requires you to forward the 5060,5090,9000-9015 ports. Go ahead and enter the settings shown above into the Port Forwarding Configuration menu and then click Apply.
| Select service by name: |
| - OR - |
| Select protocol: and TCP/UDP port(s): - |
| Redirect selected protocol/service to this router. |
| Redirect selected protocol/service to IP Address: |
You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding Configuration page. Go ahead and enter those settings and then click Apply.
| Select service by name: |
| - OR - |
| Select protocol: and TCP/UDP port(s): - |
| Redirect selected protocol/service to this router. |
| Redirect selected protocol/service to IP Address: |
You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding Configuration page. Go ahead and enter those settings and then click Apply.
| Select service by name: |
| - OR - |
| Select protocol: and TCP/UDP port(s): - |
| Redirect selected protocol/service to this router. |
| Redirect selected protocol/service to IP Address: |
You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding Configuration page. Go ahead and enter those settings and then click Apply.
| Select service by name: |
| - OR - |
| Select protocol: and TCP/UDP port(s): - |
| Redirect selected protocol/service to this router. |
| Redirect selected protocol/service to IP Address: |
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.