Port Forwarding NetX RP32-WIFI Thermostat on the Encore ENHWI-N

What is Port Forwarding?

View all Router Screenshots.

Home > Routers > Encore > ENHWI-N > NetX RP32-WIFI Thermostat

To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for your computer.

Or you can take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

ENHWI-N

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 192.168.2.1.

ENHWI-N

You should see a box prompting you for your username and password. Enter your username and password now. By default the username is Administrator, and the password is admin. Click the Login button to log in to your router.

Please visit our Default Router Passwords page if the username and password shown above did not work for you.

ENHWI-N

Click the NAT Settings link near the left of the page.

You should now see a new menu. In this new menu, click Virtual Server.

ENHWI-N



Entry #1

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. NetX RP32-WIFI Thermostat requires you to forward the 81-89,10001-10019 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Add.

Enable this Rule :  
Application Select :  
WAN Port :  
Protocol :  
LAN Server IP :  
LAN Port :  
Action :  

And that is it! You are done!


To test if your port has been properly forwarded, you can use our Port Checker tool.

Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.